FLYNGO Motion Sensor Under Cabinet LED Light, 3 Color Modes Wireless Rechargeable Closet Light with Stepless Dimming for Under Counter, Kitchen, Cabinet, Wardrobe, Bedroom, Cupboard (30 CM)

Rechargeable Motion Sensor LED Light Bar - Magnetic

The dark cabinet problem

You open your wardrobe at night. You can’t see your clothes. You turn on the room light and wake someone up.

You reach into the kitchen cabinet for a glass. It’s dark. You knock something over.

You fumble for the hallway switch at 2 AM. You stub your toe on the stairs.

The problem isn’t your eyes. It’s that the light is in the wrong place.

A simple fix: Put light exactly where your hands are

This thin LED bar sticks under any shelf, cabinet, or wardrobe. When you walk near it, the light turns on by itself. When you leave, it turns off by itself.

No switch. No wiring. No drilling holes.

You get light only when you need it, right where you need it.

Why this light works when plug-in lamps don’t

1. It uses a motion sensor + a light sensor
   The round eye on the front sees two things. First, is it dark? Second, is someone moving? Only if both are true, the light turns on. During the day, it stays off even if you walk past. At night, it turns on before you reach the cabinet. Then it shuts off 18 seconds after you leave. You don’t touch anything. Your battery lasts months, not days.

2. It’s magnetic, so you can charge it easily
   Cheap stick-on lights die because you can’t charge them. This one snaps off the wall. Two metal plates stick to your cabinet with 3M tape. The light bar holds on with strong magnets. When the battery gets low, pull it off. Charge it with a USB cable like your phone. Snap it back on. No tools. No new batteries.

3. The light is bright but soft
   It uses LED chips behind a frosted cover. That means no harsh dots of light that hurt your eyes at night. It spreads an even, white light across your whole shelf. Bright enough to find black socks in a dark wardrobe. Soft enough that it won’t blind you at 3 AM.

How to install it

1. Peel the tape off the two metal plates. Stick them under your shelf. Press for 30 seconds.
2. Wait 1 hour. The glue needs to set.
3. Hold the light bar near the plates. The magnets pull it on. Done.

Takes 3 minutes. If you move homes, heat the plates with a hair dryer and pull them off. No damage.

Where to use it

• Wardrobes: See all your clothes without turning on the room light
• Kitchen cabinets: Find spices and plates without shadows
• Under the bed: So you don’t step on toys at night
• Staircases: Turns on as you walk up, so you don’t miss a step
• Bookshelves: Read without a table lamp

Modes

• Mode 1: Night Sensor: Only turns on in the dark when it sees movement. Saves battery. Best for bedrooms.
• Mode 2: Day + Night Sensor: Turns on with movement any time. Best for closed cabinets.
• Mode 3: Always On: Use it as a normal light. Best for reading or work.

What you get

• 1x Rechargeable LED light bar
• 2x Metal mounting plates with 3M tape
• 1x USB charging cable
• No more dark cabinets
• No more waking people up with bright lights
• No more electrician bills for wiring

Battery: One charge lasts 4-6 months with normal use in sensor mode. Charges in 2-3 hours.

Size: 30cm long. Covers most wardrobes and kitchen cabinets. If you have a long space, use two.

If you’re tired of dark corners and don’t want to call an electrician, this solves it.